ACCUTRON BATTERIES, CRYSTALS, GASKETS, HANDS & MORE

Thumbnail/ Item#	Description Order parts carefully, as they cannot be returned once opened.	Price
214SET Click Photo	Accutron 214 Gasket Set Finally!! Accutron 214 BACK and HATCH Gasket Set. Each package includes 1 G735-Accutron 214 Case Back Gasket and 1 G736-Battery Hatch Gasket. (Please order carefully. I'm sorry, but gaskets are not returnable).	$22.50
G780 Click Photo	Accutron 218 Back Gasket Finally!! Accutron 218 Series Case Back Gasket. Package includes 1 G780 Case Back Gasket. (Please order carefully. I'm sorry, but gaskets are not returnable).	$19.50
SHINO	Professional Jewelry Polishing Cloth This is probably the last polishing cloth you'll ever need to buy. These are professional quality, two layer polishing cloths. The inner "dark red" cloth is heavily impregnated with jeweler's rouge and the outer "yellow" section is for the final polish. These cloths work equally well for gold, gold filled, gold electroplated and stainless steel cases. I've been using the same Shino since 1997, and I use mine every day. They're truly amazing!	$59.95
ACCW Click Photo	Accutron Case Back Wrench This great case back wrench will remove locking rings on both 214 and 218 models of Accutrons. With this handy little tool, 218 owners can change their own batteries! (carefully, of course)	$59.95
GR303 Click Photo	Watchmaker's Screwdriver for Battery Installation This special screwdriver is the perfect size for loosening the battery strap screw on the 218 series Accutron watches. It's a critical tool for the Accutron owner who prefers to perform their own battery installations. The width of the blade is correct for the screw slot. And as any professional watchmaker will tell you, too small a screwdriver and you'll ruin the screw slot -- too large and you can break the screw head or damage adjacent components. The shaft of the tool is turned for easy handling, and the top pivots 360 degrees to apply even, steady pressure.	$32.15
ACU1 Click Photo	Accutron Battery ACCUCELL-1 Battery Single pack, 1.35V Silver Oxide Accutron Battery suitable for 214 Accutrons. This replacement Accutron Battery should be used in those watches which have NOT been adjusted for the higher voltages of modern cells. (Please order carefully. I'm sorry, but batteries are not returnable.)	$19.95
ACU4PAK Click Photo	Accutron Battery ACCUCELL-1 Battery 4 Pack SAVE by buying this AccuCell 4-pack, 1.35V Silver Oxide 214 Accutron Battery. (I'm sorry, but batteries are not returnable).	$72.50
387S/394 Click Photo	Accutron Battery - Energizer 387S Battery (Now a 394) This is a very popular 1.5V Silver Oxide replacement to the original 1.35V Mercury 387 battery used in Accutron 214 models. This replacement Accutron Battery should be used in those watches which have been adjusted for the higher voltages of modern cells and for the very few 214 watches which will keep accurate time using the 1.5V cell. The manufacturer is recently consolidated several battery sizes and is now packaging this 394 in the 387S packages. They are still the correct voltage and size for your Vintage Accutron and still carry the plastic gromet. I'm Sorry, but Batteries are not returnable.	$15.50
387S/394-5PAK Discount Pak Click Photo	Accutron Battery - Energizer 387S Battery (Now a 394) Super Saver 5-Pack Sold in an economical 5-Pack Strip, this is a very popular 1.5V Silver Oxide replacement to the original 1.35V Mercury 387 battery used in Accutron 214 models. This replacement Accutron Battery should be used in those watches which have been adjusted for the higher voltages of modern cells and for the 214 watches which will keep accurate time with them (without adjustment). The manufacturer has recently consolidated several battery sizes and is now packaging this 394 in the 387S packages. They are still the correct voltage and size for your Vintage Accutron and still carry the plastic grommet. This is great if you have multiple Accutron watches, and the shelf life on unopened batteries is usually 4 - 5 years or more. Buy 4 and get the 5th Battery Free I'm Sorry, but Batteries are not returnable.	$62.00
344 Click Photo	Accutron Battery - Energizer 344/350 Battery This is a very popular 1.5V Silver Oxide replacement to the original 1.35V Mercury 343 battery used in all Accutron 218 Series models. The slightly higher voltage of this replacement cell has been well tolerated in 218 models causing no real variance in timekeeping accuracy. Sorry, but Batteries are not returnable.	$15.50
344-5PAK Discount Pak Click Photo	Accutron Battery - Energizer 344/350 Battery Super Saver 5-Pack Sold in an economical 5-Pack Strip, this is a very popular 1.5V Silver Oxide replacement to the original 1.35V Mercury 343 battery used in most Accutron 218 Series watches. The slightly higher voltage of this replacement cell is well tolerated in 218 models causing no real variance in timekeeping accuracy. Buy 4 and get the 5th Battery Free Sorry, but Batteries are not returnable.	$62.00
ES80Y Click Photo	Accutron Vintage Band Extender If you're finding that your vintage watch bracelet is getting a bit SNUG, you might try one of these cool bracelet extenders. They are 16mm in width and fit most 18mm Deployant Clasp Bracelets. They're a beautiful brushed surface on the top. This photo displays it from the bottom to illustrate how they connect to your bracelet. Note: These are designed to work with many different style bracelet clasps, so it may require a jeweler to fit this to your particular clasp design. The "holes" don't always line up perfectly for all bracelets without some adjustment. (Click Here for a Photo of This Installed on a Bracelet)	$19.95
ES80W Click Photo		$19.95
ES82 Click Photo	Bracelet Extender Spring Bar This is a very special spring bar designed to be used with Bracelet Extensions (sold separately above and below). The super short ends allow the bracelet extender to be added without having the locking section extend past the bracelet itself. It can also be used when changing or replacing metal bracelet clasps. Note: Not for use in connecting leather straps	$2.95
SPBR Set Click Photo	Standard Spring Bar Set These spring bars are double telescoping for attaching bracelets or bands to the case lugs of your watch. It's a good idea to change spring bars whenever you replace your bracelet or strap. These are 16mm (for use with 18mm bands and bracelets), but all sizes are available. Old or weak spring bars can break, resulting in your watch falling and possibly being badly damaged.	$3.50
ES302 Click Photo	Professional Bergeon Spring Bar Tool for Band Replacement If you'd like to replace your Accutron band or bracelet, without enormous frustration, this tool is a must. Swiss made, this Professional Spring Bar Tool is made of high quality Steel with black anodized or stainless steel tips. One end pushes through lug holes to safely remove old spring bars, and the other end (forked) depresses the "spring arms" so you can properly align the telescopic pins into the watch lug holes. The tips are replaceable. This Spring Bar Tool is approximately 5 1/4 inches in length.	$39.95
C205W Click Photo	Accutron Spaceview Hands These are Bulova Accutron Spaceview hands suitable for most Swiss and American case styles from the early 1960s through the end of their production. The smaller Alpha and Floppy Football hands are sold separately below.	$94.00
B206W Click Photo	Accutron Spaceview Alpha Hands These are Bulova Accutron Spaceview ALPHA hands suitable for Alpha model cases, Floppy Football, Spiral Lug and Fancy Lug case styles from the early to mid 1960s. Standard Spaceview case hands are sold separately above.	$94.00
1254AYS 1254AWS Click Photo	Accutron Spaceview Crystal 1254 Measuring 30.9mm, white dot & dash markers, Tuning Fork Logo at the 12 o'clock position and the word Accutron printed beneath the Fork. (The "W" or "Y" in the Item Number indicates the color of the "White" or "Yellow" armored ring) Order crystals by specific part number or diameter, as they cannot be returned once opened. If using diameter, please provide to the 1/10th mm.	$95.50
1270AYS 1270AWS Click Photo	Accutron Spaceview Crystal 1270 This is the original style of 1270 Spaceview crystal which predates the re-designed model below. Measuring 32.7mm, white Tuning Fork Logo AND the word "Accutron" both printed at the 8 o'clock position. (The "W" or "Y" in the Item Number indicates the color of the "White" or "Yellow" armored ring) Order crystals by specific part number or diameter, as they cannot be returned once opened. If using diameter, please provide to the 1/10th mm.	$95.50
XASTRO Click Photo	Accutron ASTRONAUT Crystal Measuring 30.6mm. This Accutron Astronaut Crystal is correct with regard to side height with absolutely NO taper. An Astronaut rotating bezel will not properly seat on tapered crystals. Order crystals by specific part number or diameter, as they cannot be returned once opened.	$95.50
1222SL Click Photo	Accutron Spaceview Crystal 1222 Measuring 29.9mm, white dot & dash markers, Tuning Fork Logo at the 12 o'clock position and the word Accutron printed beneath the Fork. This crystal is commonly used for "Spaceview Conversions" and has no armored ring. Conversion requires a "dial spacer ring" Sold Separately Below. Order crystals by specific part number or diameter, as they cannot be returned once opened. If using diameter, please provide to the 1/10th mm.	$95.50
1271AWS 1271AYS Click Photo	Accutron Spaceview Crystal 1271 Measuring 31.1mm, Tuning Fork Logo at the 12 position and the word Accutron printed at the 8 o'clock position. (The "W" or "Y" in the Item Number indicates the color of the "White" or "Yellow" armored ring) Order crystals by specific part number or diameter, as they cannot be returned once opened. If using diameter, please provide to the 1/10th mm.	$95.50
454-2AWS 454-2AYS Click Photo	Accutron Spaceview Crystal 454-2 Measuring 30.1mm, Tuning Fork Logo at the 12 position and the words "Bulova Accutron" printed at the 8 o'clock position. This crystal is also marked with luminous slashes at the 5-minute. (The "W" or "Y" in the Item Number indicates the color of the "White" or "Yellow" armored ring) Order crystals by specific part number or diameter, as they cannot be returned once opened. If using diameter, please provide to the 1/10th mm.	$95.50
1277SL Click Photo	Accutron Spaceview Crystal 1277SL Measuring 29.0mm, white dot & dash markers, Tuning Fork Logo at the 12 o'clock position and the word Accutron printed beneath the Fork. This crystal is commonly used for "Spaceview Conversions" and has no armored ring. Conversion requires a "dial spacer ring" Sold Separately Below. Order crystals by specific part number or diameter, as they cannot be returned once opened. If using diameter, please provide to the 1/10th mm.	$95.50
OFT401Y Click Photo	Accutron Spaceview Part # 401Y A Bulova Accutron Dial Spacer Ring, used in converting dialed 214 Accutrons to "Spaceviews". Ring colors can either be matched to the color of the pillar plate or the color of the case. Order parts carefully, as they cannot be returned once opened.	$24.00
OFT401W Click Photo	Accutron Spaceview Part # 401W A Bulova Accutron Dial Spacer Ring, used in converting dialed 214 Accutrons to "Spaceviews". Ring colors can either be matched to the color of the pillar plate or the color of the case. Order parts carefully, as they cannot be returned once opened.	$24.00