|
Vintage Accutron Watch Repair and Restoration Authorized Bulova Dealer Repair Center Repair
Bands, Accutron Bracelets,
Accutron Straps
& Accessories
(also check our
Accutron Parts page for great buys)
 HOME |
 Spaceview Watches |
Accutron Setting |
Contact Us |
|
Thumbnail/ Item# |
Description |
Price |
 OFT 921 |
Accutron Bracelet Tiny Tuning Forks on this Spectacular vintage Accutron Bracelet. This is a full-length bracelet with several removable segments as well as adjustments on the clasp for shortening. Overall length is 6 1/4 inches (without watch attached). Straight end pieces at 18mm width will fit most Accutron watches, but look exceptional on a Spaceview. This is an extremely scarce bracelet, especially in this new/old stock condition. |
Call For Availability |
 OFT 1027 |
VINTAGE Genuine Accutron Astronaut Bullet Bracelet
This gorgeous Accutron Astronaut bracelet
is in NEW/OLD stock condition. All removable segments are present and
shortening may also be accomplished at the clasp. Overall length (without
the watch attached) is 6 3/4 inches. Standard Astronaut curved ends
measure approximately 18mm. These bracelets are extremely hard to locate
these days complete with ALL links AND in New/Old Stock condition. More great Accutron Astronaut Bracelets to be listed shortly! |
$1,255.00 Temporarily Out Of Stock |
 OFT 1080 |
VINTAGE Genuine Accutron Astronaut Coffin-Link Bracelet This gorgeous Accutron Astronaut bracelet is in fully restored condition. All the original links are intact with numerous adjustments on the clasp. The original clasp is beautifully brushed with the side bars in high polished, just like from the factory. Extremely scarce in this gorgeous condition, these bracelets don't last long. This bracelet fits the standard 18mm Accutron Case. The ends are straight. (Call to place an order with us by phone at (252) 371-1656) |
 $1,255.00 Call to place Order |
 OFT 1031W |
Double-Locking Oyster Style Stainless Steel Bracelet This high-quality Stainless Steel deployment clasp bracelet is the perfect thing for the Accutron lover who prefers a metal bracelet, but can't justify the cost of a vintage model. This beautiful bracelet features solid link construction with 4 removable segments for shortening if needed. In addition, there are 7 clasp positions for lengthening and shortening in tiny increments. Overall length is about 7 3/8 inches (without the watch attached), in the largest clasp position. So this will accommodate approximately an 8 - 8 1/2 inch wrist with ease and comfort. The double-locking clasp (fold-over lock), ensures that your watch won't slip off your wrist, even under pressure. The lug end fits cases 16mm to 22mm in width. (Don't forget new Spring Bars sold separately below) |
$72.50  |
 OFT1031Y |
Double-Locking
Oyster Style 14K Yellow Gold Plate Over Stainless Steel Bracelet This high-quality Stainless Steel deployment clasp bracelet is the perfect thing for the Accutron lover who prefers a metal bracelet, but can't justify the cost of a vintage model. This beautiful bracelet features solid link construction with 4 removable segments for shortening if needed. In addition, there are 7 clasp positions for lengthening and shortening in tiny increments. Overall length is about 7 3/8 inches (without the watch attached), in the largest clasp position. So this will accommodate approximately an 8 - 8 ½ inch wrist with ease and comfort. The double-locking clasp (fold-over lock), ensures that your watch won't slip off your wrist, even under pressure. The lug end fits cases 16mm to 22mm in width. (Don't forget new Spring Bars sold separately below) |
$72.50 |
 OFT1032Y |
Bullet Style 14K Yellow Gold Plate Over Stainless Steel Bracelet This high-quality Stainless Steel Deployment clasp bracelet is another perfect match for your favorite Accutron watches. This beautiful bracelet features solid link construction with removable links for shortening. At full length, this bracelet measures approximately 7 3/8 inches in length. So this will accommodate approximately an 8 - 8 ½ inch wrist comfortably. With the spring-loaded end piece connections, this bracelet will fit watches 16mm to 21mm in lug width. (Don't forget new Spring Bars sold separately below) |
$72.50 |
 OFT 822BL |
BLACK
GENUINE
LIZARD
Accutron STRAP These non-padded straps are very similar to those originally installed on the vintage Accutron watches. These straps are 18mm wide at the lug. Gold-tone buckle is standard, Regular length*. New Stock. Silver-tone buckle also available upon request. Spring Bars should be changed every time a band is removed or a new one installed. The old spring bars weaken over time and dirt and debris clog the mechanism. (Don't forget new Spring Bars sold separately below) *Regular length typically fits a standard 7.5-inch wrist |
$72.50 |
 OFT 819GR |
GREEN
GENUINE
LIZARD
SPACEVIEW STRAP This is a gorgeous GREEN lizard skin. OFT's signature strap for all our Spaceviews is GREEN, and this particular shade is a perfect complement to the Spaceview Green Coil Form. These straps are 18mm wide at the lug. Gold-tone buckle, standard length. New Stock. Silver-tone buckle also available. Spring Bars should be changed every time a band is removed or a new one installed. The old spring bars weaken over time and dirt and debris clog the mechanism. (Don't forget new Spring Bars sold separately below)
*Regular length typically fits a
standard 7.5-inch wrist |
$72.50 |
 OFT 218GR |
OFT GREEN GATOR
SPACEVIEW BAND
This is a gorgeous GREEN GATOR Calf Strap made specifically for Old Father Time. It really shows off those SPACEVIEWS! This strap is 18mm in width at the lugs and comes in both White (W), and Yellow (Y) buckles. Note: Buckle color (W or Y) should be added when ordering. (Don't forget new Spring Bars sold separately below)34Spring Bars should be changed every time a band is removed or a new one installed. The old spring bars weaken over time and dirt and debris clog the mechanism.
*Regular length typically fits a
standard 7.5-inch wrist |
$34.95 |
 OFT 217BL |
Vintage
Style
Tapered Accutron Band in Black These handsome GENUINE LEATHER skins and very soft to the touch. Bands come with modern Gold Tone metal buckles and are standard length and 18mm in width (perfect for most vintage Accutron watches). Like the originals, these are sharply tapered to 14mm at the buckle end for comfort. They are very similar to the original lizard straps on the 1960s-1970s Accutrons. (Don't forget new Spring Bars sold separately below) Spring Bars should be changed every time a band is removed or a new one installed. The old spring bars weaken over time and dirt and debris clog the mechanism.
*Regular length typically fits a
standard 7.5-inch wrist |
$34.95 |
 OFT 217BR |
Vintage
Style
Tapered Accutron Band in Brown These handsome GENUINE LIZARD skins and very soft to the touch. Bands come with modern Gold Tone metal buckles and are standard length and 18mm in width (perfect for most vintage Accutron watches). Like the originals, these are sharply tapered to 14mm at the buckle end for comfort. They are very similar to the original lizard straps on the 1960s-1970s Accutrons. (Don't forget new Spring Bars sold separately below) Spring Bars should be changed every time a band is removed or a new one installed. The old spring bars weaken over time and dirt and debris clog the mechanism.
*Regular length typically fits a
standard 7.5-inch wrist |
$34.95 |
 SPBR Set |
Standard Double-Shouldered
Telescoping Spring Bar Set These spring bars are double shouldered for attaching bracelets or bands to the case lugs of your watch. It's a good idea to change spring bars whenever you replace your bracelet or strap. These are 16mm (for use with 18mm bands and bracelets), but all sizes are available. Old or weak spring bars can break, resulting in your watch falling and possibly being badly damaged.32 |
$3.50 |
 ES-302 |
Professional
Bergeon Spring Bar Tool for Band Replacement
If you'd like to replace your Accutron band or bracelet, without enormous frustration, this tool is a must. Swiss made, this Professional Spring Bar Tool is made of high quality Steel with black anodized or stainless steel tips. One end pushes through lug holes to safely remove old spring bars, and the other end (forked) depresses the "spring arms" so you can properly align the telescopic pins into the watch lug holes. The tips are replaceable. This Spring Bar Tool is approximately 5 1/4 inches in length.31 |
$39.95 |
[Home]
[Accutron
Repair Form] [OFT Accutron Reviews] [Accutron
Setting Info] [Accutron
History 1] [Accutron
History 2] [Accutron
Anomalies]
[Accutron
Parts] [Spaceview
Watches] [Accutron
Repair] [Accutron
Watch Repair] [Accutron
Bands] [Accutron
Photo Gallery]
[Accutron Links]
[Accutron
Spaceview Related Links]
[Accutron
Repair Prices]
[Accutron Security
Info] [Accutron
Watches for Sale]
[OFT Custom Watch
Chains] [Spaceview
Repair] [Site
Map] [Contact
Us]
Accutron
Bands Accutron Straps Accutron watch bands accutron watchbands
spaceview
